Busca de Produtos



PRODUTOS
Computer Controlled Waves Energy
Cód. EOMC
PRINCIPAIS CARACTERÍSTICAS
Mais Detalhes do Produto

 

EOMC-UB. Base Service Unit and Waves Generator:
This unit is common for Energy Generation Modules  type “EOMC” and can work with one or 
several modules.
Anodized aluminium structure and panels in painted steel (epoxy paint).
Main metallic elements in stainless steel.
Diagram in the front panel with similar distribution to the elements in the real unit.
The unit is mainly formed by:
Rectangular transparent tank, to be filled with water, where the different energy generation 
modules will be placed.
Waves generator:
The waves generator produce different types of waves. It is based on a blade which pulls the 
water, producing the waves. The waves frequency is modified by changing the blade 
rotating speed. The blade rotating speed can be regulated. The waves size changes
according to the displaced water quantity. The displaced water quantity is modified by 
changing the water level in the tank or adjusting the blade in order to introduce it deeper 
into the tank.
Technical data:
Speed control from the computer (PC).
0-150 r.p.m.
Blade, adjustable in height.
6 Pressure sensors placed in the bottom of the tank for measuring the wave shape.
DC generator and DC loads module.
Power measurement from the computer (PC)
This unit is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and 
Control Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals.

EOMC-1. Floating Buoy Module:
 
 
A Floating Buoy system consists of a floating structure anchored to the seabed, which is used 
as the support of a cylinder which freely floats with an upwards and downwards vertical
movement, following the waves. This cylinder slides by a central shaft joint to the immobile 
structure. The relative movement of the cylinder sliding through the shaft and the fixed 
structured servesto activate an energy converter which can be hydraulic or electromagnetic.
The module EOMC-1 is designed for simulating this energy generation system, allowing the 
study and tests of the operation and performance of a floating buoy for energy generation.
This module will generate mechanical and/or electrical energy.
The module is prepared to be installed in the Base Service Unit and it is supplied with the 
suitable sensors and instrumentation for the most representative measurements.
Compatible with actual Windows operating systems. Graphic and intuitive simulation of the process in 
screen. Compatible with the industry standards. 
Registration and visualization of all process variables in an automatic and simultaneously way.
Flexible, open and multicontrol software, developed with actual windows graphic systems, 
acting simultaneously on all process parameters.
Management, processing, comparison and storage of data. 
Sampling velocity up to 250,000 data per second guaranteed. 
Calibration system for the sensors involved in the process.
It allows the registration of the alarms state and the graphic representation in real time. 
Comparative analysis of the obtained data, after the process and modification of the conditions during 
the process. 
Open software, allowing to the teacher to modify texts, instructions. Teacher’s and student’s
passwords to facilitate the teacher’s control on the student, and allowing the access at different work 
levels.
This unit allows that the 30 students of the classroom can visualize simultaneously all results 
and manipulation of the unit, during the process, by using a projector.
 

 

EOMC-2. Oscillating Water Column Module:
 
 
An Oscillating Water Column system is a structure with an opening for the wave.
When the water enters in the enclosure, it displaces the existing air into the enclosure 
and forces the air to exit by a duct where a turbine is installed. The air makes the turbine 
coupled to a generator to rotate. When the wave retires, the air enters in the enclosure 
through the same duct, at this moment in the reverse direction.
The module EOMC-2 is designed for simulating this energy generation system, allowing the 
study and tests of the operation and performance of an oscillating water column for energy 
generation.
This module will generate mechanical and/or electrical energy.
The module is prepared to be installed in the Base Service Unit and it is supplied with the 
suitable sensors and instrumentation for the most representative measurements.
Compatible with actual Windows operating systems. Graphic and intuitive simulation of the process in 
screen. Compatible with the industry standards. 
Registration and visualization of all process variables in an automatic and simultaneously way.
Flexible, open and multicontrol software,  developed with actual windows graphic systems, acting 
simultaneously on all process parameters.
Management, processing, comparison and storage of data. 
Sampling velocity up to 250,000 data per second guaranteed. 
Calibration system for the sensors involved in the process.
It allows the registration of the alarms state and the graphic representation in real time. 
Comparative analysis of the obtained data, after the process and modification of the conditions
during the process.
Open software, allowing to the teacher to modify texts, instructions. Teacher’s and student’s
passwords to facilitate the teacher’s control on the student, and allowing the access at different work 
levels.
This unit allows that the 30 students of the classroom can visualize simultaneously all results 
and manipulation of the unit, during the process, by using a projector.
This module is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and 
Control Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals.
Computer Control Software:
Computer Control+Data Acquisition+Data Management Software for Floating Buoy
Module (EOMC-1).
This module is supplied with 8 manuals: Required Services, Assembly and Installation, Interface 
and Control Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals.
Computer Control Software:
Computer Control+Data Acquisition+Data Management Software for Oscillating Water
Column Module (EOMC-2)
 
EOMC-3. Pelamis Module:
 
 
The “Pelamis” is an attenuating type device. It consists on a longitudinal chain of cylinders
linked each one with the others and anchored to the seabed, so that they are correspondingly
aligned to the waves direction. A cylinders nodding is produced because of the wave height
and this movement is used by the pistons connected between each cylinder to impulse the fluid 
in an hydraulic circuit to produce electric energy.
The module EOMC-3 is designed for simulating this energy generation system, allowing the 
study and tests of the operation and performance of a pelamis device for energy generation.
This module will generate mechanical and/or electrical energy.
The module is prepared to be installed in the Base Service Unit and it is supplied with the 
suitable sensors and instrumentation for the most representative measurements.
Compatible with actual Windows operating systems.  Graphic and intuitive simulation of the process 
in screen. Compatible with the industry standards. 
Registration and visualization of all process variables in an automatic and simultaneously way.
Flexible, open and multicontrol software,  developed with actual windows graphic systems, acting 
simultaneously on all process parameters.
Management, processing, comparison and storage of data. 
Sampling velocity up to 250,000 data per second guaranteed. 
Calibration system for the sensors involved in the process.
It allows the registration of the alarms state and the graphic representation in real time. 
Comparative analysis of the obtained data, after the process and modification of the conditions during 
the process. 
Open software, allowing to the teacher to modify texts, instructions. Teacher’s and student’s
passwords to facilitate the teacher’s control on the student, and allowing the access at different work 
levels.
This unit allows that the 30 students of the classroom can visualize simultaneously all results 
and manipulation of the unit, during the process, by using a projector.
 
EOMC-4. Tapered Channel Module:
 
 
The Tapered Chanel is a channel built on the coast in the direction of the incident wave. The 
channel progressively narrows to the inside of the coast. When the wave enters the channel, it 
goes to a every time less section, which makes it to take a every time higher height to enter in a 
tank placed at the end of the channel.
Thus, there is water at a bigger height which can be used to turbine.
Summarizing, it concentrates the waves and guides them up a tapered ramp into a tank, from 
which a turbine extracts energy.
The module EOMC-4 is designed for simulating this energy generation system, allowing the 
study and tests of the operation and performance of a tapered channel for energy generation.
This module will generate mechanical and/or electrical energy.
The module is prepared to be installed in the Base Service Unit and it is supplied with the 
suitable sensors and instrumentation for the most representative measurements.
Compatible with actual Windows operating systems. Graphic and intuitive simulation of the process in 
screen. Compatible with the industry standards. 
Registration and visualization of all process variables in an automatic and simultaneously way.
Flexible, open and multicontrol software,  developed with actual windows graphic systems, acting 
simultaneously on all process parameters.
Management, processing, comparison and storage of data. 
Sampling velocity up to 250,000 data per second guaranteed. 
Calibration system for the sensors involved in the process.
It allows the registration of the alarms state and the graphic representation in real time. 
Comparative analysis of the obtained data, after the process and modification of the conditions during 
the process. 
Open software, allowing to the teacher to modify texts, instructions. Teacher’s and student’s
passwords to facilitate the teacher’s control on the student, and allowing the access at different work 
levels.
This unit allows that the 30 students of the classroom can visualize simultaneously all results 
and manipulation of the unit, during the process, by using a projector.
This module is supplied with 8 manuals: Required Services, Assembly and Installation, Interface 
and Control Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals.
Computer Control Software:
Computer Control+Data Acquisition+Data Management Software for Pelamis
Module (EOMC-3).
This module is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and 
Control Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals.
Computer Control Software:
Computer Control+Data Acquisition+Data Management Software for Tapered Channel 
Module (EOMC-4).
 
EOMC-5. Salter’s Duck Module:
 
 
Salter’s Duck is a small buoy anchored to the seabed in a particular way which seems a duck 
moves in a swinging way when receiving the waves. This rotation is used to move, by means 
of mechanisms, a system connected to a generator.
The EOMC-5 module is designed for simulating this energy generation system, allowing the 
study and tests of the operation and performance of a salter’s duck for energy generation.
This module will generate mechanical and/or electrical energy.
The module is prepared to be installed in the Base Service Unit and it is supplied with the 
suitable sensors and instrumentation for the most representative measurements.
Compatible with actual Windows operating systems. 
Graphic and intuitive simulation of the process in screen. 
Compatible with the industry standards. 
Registration and visualization of all process variables in an automatic and simultaneously way.
Flexible, open and multicontrol software,  developed with actual windows graphic systems, acting 
simultaneously on all process parameters.
Management, processing, comparison and storage of data. 
Sampling velocity up to 250,000 data per second guaranteed. 
Calibration system for the sensors involved in the process.
It allows the registration of the alarms state and the graphic representation in real time. 
Comparative analysis of the obtained data, after the process and modification of the conditions
during the process. 
Open software, allowing to the teacher to modify texts, instructions. Teacher’s and student’s
passwords to facilitate the teacher’s control on the student, and allowing the access at different work 
levels.
This unit allows that the 30 students of the classroom can visualize simultaneously all results 
and manipulation of the unit, during the process, by using a projector.